Handle Three Circles
- 160 mm wide, same frame as the ribbed small
- Three smooth spheres — no teeth, no marking
- For sensitive tissue that a ribbed roller would bruise
- Solid urapán (Fraxinus uhdei) — a dense hardwood that holds an edge
Three smooth spheres on the same bridge frame as the ribbed handle. No teeth: it follows a curve and glides rather than catching.
This is the one to reach for when tolerance is low — first sessions, thin skin, the inner arm. Same grip as its ribbed twin, so you can swap between them without relearning the movement. Short upward passes toward the nearest nodes.
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
- Made by us Turned and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
Three spheres, no teeth. The one you reach for when tolerance is low.
Indicated for
Where this tool earns its place
Not the right tool for
Dense, resistant tissue. Smooth spheres roll over it — that is the point of the shape, not a shortcoming. If you need bite, use the ribbed version of the same frame.
- Sensitive clientsSmooth spheres where teeth would be too much.
- Inner thigh and armThin skin that still needs to be moved.
- First sessionsBuild tolerance before introducing a toothed surface.
- Same frame, softer faceIdentical grip to the ribbed handle — swap without relearning the movement.
- Free-turningThree spheres, so it follows a curve instead of bridging over it.
- Post-operative stagesOnly from the point the treating surgeon has cleared in writing.
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Overall length | 160 mm 6.3 in |
|---|---|
| Overall height | 125 mm 4.9 in |
| Roller length | 110 mm 4.3 in |
| Roller depth | 45 mm 1.8 in |
| Profile | Three spheres smooth, free-turning |
| Grip | Bridge handle whole hand over the top |
| Wood | Urapán (Fraxinus uhdei) solid |
| Finish | Natural, unvarnished sanded to a closed grain |
| Body areas | Arm, inner thigh, sensitive areas |
Technique
How to work with it
- 01
Choose it deliberately
This is the smooth option in a pair. Pick it because the client or the area calls for it, not because it was nearest.
- 02
Hand over the bridge
Weight through a straight wrist, spheres turning freely.
- 03
Short upward passes
Always toward the nearest nodes. Reset rather than dragging back.
- 04
Escalate only if she asks
If she wants more, move to the ribbed handle next session — not by pressing harder with this one.
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
It is 160 mm end to end. Handle: Bridge handle. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing