Face Lift Kit
- Six pieces, 90–140 mm — cup, two rollers, twin roller, five-peg head and Y board
- Face, neckline and arms — light pressure, centre-outward, down to the collarbone
- For the appearance of fine lines and the look of firmness
- Solid urapán (Fraxinus uhdei), natural and unvarnished
Six pieces for the face, neckline and arms: a 100 × 35 mm cup, two 120 × 30 mm rollers, a 140 × 45 mm twin roller, a 90 × 35 mm five-peg head and a 110 × 65 mm Y board.
Each piece is chosen for the area being worked, then applied on cleansed and oiled skin with light pressure, centre-outward across the face and down the neck to the collarbone. For the appearance of fine lines and the look of firmness. Never around the eye, and never on active acne, rosacea or broken capillaries.
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
What is in the case
6 pieces, and what each one is for
Cup to lift, rollers to work, pegs for the detail, board to close — six pieces sized for facial work, where a body tool would overwhelm the tissue.
-
Facial cupSuction and lift — opens the session on cheek and jawline100 × 35 mm
-
Rollertwo includedThe working pass along cheek, jaw and neck120 × 30 mm
-
Twin rollerWider coverage for the neckline and the arm140 × 45 mm
-
Five-peg headPoint work on cheek and chin, after the rollers90 × 35 mm
-
Y boardContouring and drainage — closes toward the collarbone110 × 65 mm
Every piece here is scaled to the face: nothing wider than 140 mm, nothing that needs two hands. Worked on cleansed and oiled skin, light pressure, centre-outward and down the neck toward the collarbone. Never around the eye, and never over active acne, rosacea or broken capillaries.
- Made by us Turned and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
Six pieces scaled to a face, where the body tools would be too much
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Pieces | 6 cup, 2 rollers, twin roller, five-peg head, Y board |
|---|---|
| Facial cup | 100 × 35 mm lifts rather than presses |
| Rollers | 120 × 30 mm two of them — cheek, jaw and neck |
| Twin roller | 140 × 45 mm wider passes, neckline and arm |
| Five-peg head | 90 × 35 mm point work on cheek and chin |
| Y board | 110 × 65 mm contouring and the close of the session |
| Wood | Urapán (Fraxinus uhdei) solid, dense hardwood |
| Finish | Natural, unvarnished sanded to a closed grain |
| Shipping weight | 0.5 kg 1.1 lb, the kit boxed |
| Technique | Facial woodtherapy lifting and drainage |
| Body areas | Face, neckline, arms |
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
The working surface is 90 × 35 mm. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing