Buttock Lift Cups
- 145 mm rims — sized to the gluteal curve
- A matched pair, for both sides at once
- Suction lifts; a roller can only press down
- Solid urapán (Fraxinus uhdei) — a dense hardwood that holds an edge
- The Buttock Lift Cups are specifically designed to enhance and shape the buttocks. This set includes two cups, one for each buttock and leg, allowing for targeted and effective treatments. By grasping the cups by their handles and performing cupping maneuvers, you can create a vacuum effect that helps to lift and contour the buttocks.
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
- Made by us Turned and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
145 mm — the widest rim in the range, and a pair of them.
Indicated for
Where this tool earns its place
Not the right tool for
Anywhere but the buttock. A 145 mm rim needs a large convex surface to seat on — on anything else it touches at the edges and concentrates all the pressure there. Not over bone, varicose veins, open wounds or fresh scar tissue.
- Buttock, both sidesA matched pair, so left and right get the same work.
- The widest rim we make145 mm covers the gluteal plane in one seating.
- Lifting movementsBroad contact draws the tissue upward as a whole.
- Volumising protocolsThe area clients ask about by name.
- 50 mm knobsHeld from above — body weight, not wrist strength.
- Post-operative stagesOnly from the point the treating surgeon has cleared in writing.
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Overall height | 180 mm 7.1 in |
|---|---|
| Cup diameter | 145 mm 5.7 in — the widest rim we make |
| Knob height | 70 mm 2.8 in |
| Knob diameter | 50 mm 2.0 in |
| Supplied as | Pair two matched cups |
| Wood | Urapán (Fraxinus uhdei) solid, dense hardwood |
| Finish | Natural, unvarnished sanded to a closed grain |
| Technique | Two-handed cupping lifting and volumising |
| Body areas | Buttock |
Technique
How to work with it
- 01
Oil the whole area first
145 mm of rim needs slip across all of it. Patchy oil means the dry part takes everything.
- 02
Seat both rims flat
Full contact before you move. If a rim is tipped, reseat it — do not push through.
- 03
Work upward and inward
From the fold upward. The direction is the treatment; pressure is secondary.
- 04
Drain to the groin
Finish by carrying the fluid to the inguinal nodes, by hand or with a smooth board.
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
The working surface is 145 mm. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing