P Board
- 245 × 125 mm — one flared wing, asymmetric
- Smooth edges: drainage without adding trauma
- The finisher for abdominal contouring protocols
- Solid urapán (Fraxinus uhdei) — a dense hardwood that holds an edge
- The P board is a specialized tool designed for contouring and draining the body. Its ergonomic shape allows for easy handling and positioning on various body parts. Whether it’s the abdomen, thighs, or other areas, the P board is adaptable to the curves and contours of the body, providing optimal results
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
- Made by us Cut and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
One wing, for working into a single curve.
Indicated for
Where this tool earns its place
Not the right tool for
Working tissue at depth. There is no edge and no bite by design — if you need to mobilise, use a ribbed or cubed roller first and come back to this. Also not over bone, varicose veins, open wounds or fresh scar tissue.
- DrainageSmooth rounded edges move fluid without adding trauma.
- Session finisherThe last tool, after everything deeper has been done.
- A single curveOne flared wing, for working into the line of a flank or a thigh.
- Abdomen and arm245 mm covers the area without being unwieldy on a limb.
- Sensitive clientsWhen tolerance is low but the area still needs to be moved.
- Post-operative stagesOnly from the point the treating surgeon has cleared in writing.
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Overall length | 245 mm 9.6 in |
|---|---|
| Overall width | 125 mm 4.9 in |
| Profile | P shape one flared wing |
| Edges | Smooth, rounded for drainage, no marking |
| Wood | Urapán (Fraxinus uhdei) solid, dense hardwood |
| Finish | Natural, unvarnished sanded to a closed grain |
| Technique | Woodtherapy drainage and finishing |
| Body areas | Abdomen, thigh, arm |
Technique
How to work with it
- 01
Work it last
A board is the close of a session. Using it before the deeper phases wastes it — there is nothing loosened yet to move.
- 02
Lay the wing into the curve
The flared side goes against the body line. Held flat on a flat plane it is just a paddle; against a curve it does what it was cut for.
- 03
Slow, flat, toward the nodes
Long strokes with the whole face in contact. Speed is the enemy here — drainage is not a scrubbing motion.
- 04
Finish by hand
Close with manual drainage. The board moves the bulk; your hands finish it.
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
It is 245 mm end to end. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing