Flat Shaper Pro
The Flat Shaper Pro is built for professionals in aesthetic centres, for quick, effective sessions on the look of dimpled skin. Its size and ergonomic design allow precise application and comfortable line massages that work the soft tissue of the treated area and support circulation. With the Flat Shaper Pro you can leave your clients with smooth, toned-looking skin and a renewed sense of well-being.
- 280 × 135 mm — twice the face of the standard flat shaper
- 20 mm pegs across the whole surface
- Two grips: your weight, not your wrists
- Solid urapán (Fraxinus uhdei) — a dense hardwood that holds an edge
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
- Made by us Turned and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
Two-handed, 280 mm of pegs. The firmest thing in the wood line.
Indicated for
Where this tool earns its place
Not the right tool for
Small areas, thin skin, or a first session with a new client. Two hands on 280 mm of pegs is a lot of pressure — earn the tolerance before you reach for it. Not over bone, varicose veins, open wounds or fresh scar tissue.
- Back, thigh, buttockLarge flat planes that take firm two-handed work.
- Dense tissue20 mm pegs over 280 × 135 mm of face.
- Two bar gripsBoth hands, even pressure, no wrist strain.
- Line massageLong parallel passes across a large area.
- After the rollersThe firm phase, once the area is warm and open.
- Post-operative stagesOnly from the point the treating surgeon has cleared in writing.
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Face length | 280 mm 11.0 in |
|---|---|
| Face width | 135 mm 5.3 in |
| Peg height | 20 mm 0.8 in |
| Overall depth | 120 mm 4.7 in, including grips |
| Grips | Two bars one at each end, two-handed |
| Wood | Urapán (Fraxinus uhdei) solid, dense hardwood |
| Finish | Natural, unvarnished sanded to a closed grain |
| Technique | Woodtherapy line massage over large areas |
| Body areas | Back, thigh, buttock, abdomen |
Technique
How to work with it
- 01
Never open with it
Warm and open the area with a roller first. Cold tissue under this tool is how you leave marks.
- 02
Both hands on the bars
Even pressure across the face. One-handed, it tips onto an edge and concentrates everything on two pegs.
- 03
Long parallel passes
Toward the nearest nodes, overlapping slightly. Keep the whole face in contact throughout.
- 04
Watch the skin, then drain
Warmth and colour are expected; lasting redness means back off. Close with a smooth board and manual drainage.
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
It is 280 mm end to end. The working surface is 280 mm. Handle: Two bars. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing