Body Brush Roller
- 290 mm with a 175 mm handle — one hand, no help
- 145 mm toothed barrel on a steel yoke
- The tool a client can genuinely use between sessions
- Solid urapán barrel, not moulded
A one-handed roller for body treatments. The deep-cut teeth across the full 145 mm barrel catch and work the tissue rather than gliding over it, supporting circulation and improving the look of skin texture and firmness on the thighs and abdomen. Light pressure and plenty of oil — the teeth do the work.
How does it work?
Taking care of your pieces
Would you like to customize your products?
Choose options
- Made by us Turned and finished in our own workshop in Colombia
- Solid urapán Fraxinus uhdei — dense enough to hold an edge under pressure
- Ships worldwide Tracked delivery to professionals in eight countries
- Trade pricing From 10 pieces, with your clinic's name engraved See wholesale tiers
One hand, deep teeth. The tool a client can take home.
Indicated for
Where this tool earns its place
Not the right tool for
Two-handed cabin work on a large plane — a 450 mm roller covers that far faster. Also not for thin skin: the teeth are cut deep. Not over bone, varicose veins, open wounds or fresh scar tissue.
- One-handed175 mm handle. The other hand stays free to hold or stabilise.
- Home maintenanceWhat a client uses on herself between appointments.
- Deep-cut teethAcross the full 145 mm barrel — it catches rather than glides.
- Thigh and abdomenReachable by the client on her own.
- RetailSell the maintenance, not just the session.
- Post-operative stagesOnly from the point the treating surgeon has cleared in writing.
Technical sheet
Specifications
These pieces are handmade by our artisans, so measurements may vary by a few millimetres.
| Overall length | 290 mm 11.4 in |
|---|---|
| Handle length | 175 mm 6.9 in |
| Barrel width | 145 mm 5.7 in |
| Surface | Deep cut teeth across the full barrel |
| Frame | Steel yoke single-handed roller |
| Wood | Urapán (Fraxinus uhdei) solid, dense hardwood |
| Finish | Natural, unvarnished sanded to a closed grain |
| Technique | Woodtherapy one-handed, home maintenance |
| Body areas | Thigh, abdomen, arm |
Technique
How to work with it
- 01
Always with oil
Deep teeth on dry skin catch instead of rolling. This is the step clients skip — say it out loud when you sell it.
- 02
Roll upward, toward the heart
Knee to hip, navel outward. Direction matters more than pressure.
- 03
Light pressure, more passes
The teeth do the work. Leaning on it does not make it more effective, only more likely to mark.
- 04
Five minutes an area, no more
The rule to give a client. More time is not more result.
Made by hand
We are the workshop, not the middleman
Every KOWÜA tool is turned on our own lathes. We select the timber, cut it, turn it, sand it through progressive grits and finish it by hand. Nothing is bought in and rebranded.
We work with urapán (Fraxinus uhdei) because it is a dense hardwood with a fine closed grain — the surface stays smooth against skin instead of raising fibres after a few washes — and because it takes pressure without splitting.
Buying direct means the price of the factory, custom laser engraving with your clinic’s name, and someone who can actually change the tool if you need a different profile.
Care
Cleaning and sanitising
Never
Do not autoclave, do not soak, do not put it in a dishwasher and do not leave it submerged in disinfectant. Wood is porous — immersion swells the fibre, raises the grain and will crack the piece.
- After each clientWipe off oil residue with a dry or barely damp cloth, while the tool is still warm.
- Disinfect70% alcohol on the surface, then let it air-dry completely.
- StoreDry and flat, away from direct heat and sun.
If the surface ever feels rough, a light pass with fine sandpaper along the grain restores it. That is the advantage of an unvarnished finish: it can be renewed, and there is no coating to chip into a client’s skin.
Before you order
Questions we get
How do I know it is the right size?
It is 290 mm end to end. The working surface is Deep cut teeth. Handle: 175 mm. The full specification table is above.
Can I use it on post-surgical clients?
Only with written clearance from the treating surgeon, who alone decides when a patient may progress from gentle manual lymphatic drainage to firmer tooled work. Clearance timelines vary widely between surgeons and between patients, and we publish none. Never on fresh incisions.
Does it need oil?
Yes. A dry tool on dry skin drags and bruises. Any professional massage oil works; ours are formulated to keep slip without soaking into the wood.
How long does the wood last?
With correct care — no immersion, no autoclave — solid urapán lasts years of daily clinic use. Urapán is a dense hardwood, which is why it holds a working edge instead of denting.
Will it mark the skin?
Redness and warmth during a session are expected. Bruising is not — it means too much pressure, or a tool too deep for that tissue. Treatment should never be painful.
Can I get my clinic’s name on it?
Yes. We laser-engrave logos and names from 10 pieces. See wholesale tiers and engraving.
Do you ship outside Colombia?
Yes, worldwide with tracking. For orders of 10 pieces or more we quote freight directly.
Which tool comes next?
Depends what you already have. Our wood therapy tool guide ranks every surface we make by depth and shows where each one belongs in a session.
Buying for a clinic or academy?
Wholesale starts at ten pieces
Mix and match any references. Discounts from 15%, custom laser engraving with your clinic’s name, and freight quoted directly so you are not paying retail rates.
See wholesale pricing